First-timer's Step-by-step Guide to Installing a New Shower Unit

First-timer's Step-by-step Guide to Installing a New Shower Unit

Blog Article

Schedule Service

We have stumbled on this post on How to Install a Shower Enclosure down the page on the net and felt it made good sense to discuss it with you on this site.

An effective shower setup requires mindful preparation as well as a lot of work. For the most part, you will certainly need to do 3 sorts of tasks: framing wall surfaces, setting up the plumbing, and completing wall surfaces.

Preparation

Firstly, you must decide on the type of shower that you wish to set up. It is important to identify whether the chosen shower can managing particular systems as well as can control a risk-free level of water with the boiler. Most shower devices nowadays are developed to be flexible to different water pressures (such as stored warm water and also cool keys).
It is also crucial to take into account the water pressure and the planning of the piping and drainage for the shower

Different Types of Shower Units

Push-on Mixer: The hose pipe and spray parts of the push-on mixer shower device can be attached to the bathroom faucet according to your need, as well as the water temperature level can be adjusted via the faucets. Push-on mixers are cheap and very basic to install. Nonetheless, although the hose pipe connection is straightforward, it is quickly displaced. In addition, it is inconvenient to change the temperature.

Bath/Shower Mixer: The hose pipe and also spray of this kind of shower are combined with a bathroom mixer tap, and the temperature level can be adjusted through the bathroom taps. It is a very affordable option and also no added plumbing is entailed. Nevertheless, the bath/shower mixers additionally deal with inconvenient temperature control alternatives.

Manual Mixer: The pipe and also spray of a hands-on mixer shower device are a part of the wall system as well as the hot and cold water products are linked to a single shutoff The temperature and stress of the water are regulated through either one or a range of handles (in extra costly showers). Although temperature level control is much easier in hands-on mixer types, they are extra costly than the formerly stated mixers. They additionally require added plumbing of cold and hot water supply pipelines.

Thermostatic Mixer: The hose and also spray of this shower kind are a part of the wall surface device as well as the hot and cold water materials are linked to a solitary shutoff here too. It is full with an integrated stabiliser to self-adjust the water temperature level and also to prevent it from ending up being as well warm. One of the largest advantages of a thermostatic mixer shower kind consists of hassle-free temperature control. However, it is one of the most pricey of the various mixer alternatives.

Power Shower: A power shower is a solitary system consisting of a powerful electric pump that can altering both the water stress and temperature level. This sort of shower can be fitted if there is water system from a cold water tank and also a hot water cylinder. A power shower makes the change of both pressure as well as temperature level very easy. On the other hand, it disagrees for water heated directly by the shower or where the water is provided by a combination central heating boiler under keys pressure.

Electric Shower: An electric shower is plumbed right into a mains cold water supply and also it warms the water electrically. It is important to note that for this shower kind to be mounted, the keys pressure requires to be a minimum of 0.7 kg/sq cm (10lb/sq in). The device permits the temperature and stress to be adjusted by means of a knob. Designs with temperature stabilisers are much better as they stay untouched by other taps in other places in use within the family. A significant drawback of electrical showers is that the control handle just permits the option of high temperatures at less pressure, or lower temperatures at a better stress. This is bothersome in the winter when the spray is typically weak as well as the mains water is colder. However, this problem is taken on in some models which are available with a winter/summer setting.

Approach

Relying on the kind of shower you wish to mount, the shower head have to either be suited order to avoid its contact with the water in the bath listed below or the base tray, or it needs to have a check valve.
Prior to starting, it is advisable to mark the settings of the shower head and also control, and to intend the pipe-work included. Furthermore, the water drainage system to get rid of the drainage will certainly need to be prepared. Both positions of the wire path and also the shower switch will certainly also need to be taken into consideration if an instant or electrical shower device is being installed.
Use the direction overview provided with the shower unit to fit the shower control.Before fitting the pipes that will supply the water to the shower system, it is necessary to remove the water supply. In order to safeguard the pipes, they ought to be provided a water resistant covering and also fitted with separating shutoffs. The pipelines can then be buried into the wall surface and also glued over to neaten the general appearance.
Fit the base tray, shower head, as well as fittings.
Connect the major shower control to the pipelines that will be providing the water (This might require a women screw thread adapter).
Reconnect the water as well as test the pipelines for any type of leakages, as some may require tightening up.
If you are installing an electrical shower, bear in mind to switch off the electricity supply prior to making any electric links. Once these links have actually been made (there ought to be advice within the instruction manual), the power supply can be switched over back on.

Readjusting Water Stress to Match Your Shower

The cold water reservoir can be raised to a higher elevation (occasionally as low as 150mm (6inches)) by installation a solid wooden support underneath it - perhaps made up of struts and blockboards. If you choose this choice, the primary as well as circulation pipelines will certainly additionally have to be increased to satisfy the new height of the reservoir.
Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is picked, it needs to be linked into the power supply in order to operate.

Piping and also Water drainage

It is best to utilize 15mm diameter supply pipelines, and make the go to the shower as short and straight as possible so regarding preserve optimal stress as well as reduce warm loss. Additionally, by minimising the use of elbows for pipe edges, you can lower the resistance in the circulation of the water. You can attain this by flexing the pipes rather.

A Lot Of Typical Mistakes

Violating or disregarding neighborhood code limitations.

Making use of pipes that are too tiny.

Affixing copper to galvanized without utilizing a brass or dielectric fitting in between the two.

Not utilizing tape or pipe substance at threaded joints.

Not leveling your fixtures when installing them.

Not setting up an air void loading for components.

Cutting supply stub outs too short to install the shutoff valves onto after the finished wall remains in area.

Not properly aligning tubing right into fittings or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will certainly create a leak.).

When turning the water back on in your house, always run the outdoors pipe valve or purge your commodes to bleed dust as well as air from the lines. This debris can create issues in your sink faucets and also other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

We are very interested by How to Install a Direct-to-Stud Shower Enclosure and I hope you enjoyed reading the entire entry. Sharing is nice. You won't know, you may be doing someone a favor. Thank you for going through it.

Request Estimate

Report this page